Old 08-07-2016, 01:36 AM
kေဇာ္ေအာင္
လမ္းေလွ်ာက္တတ္စ
 
kေဇာ္ေအာင္'s Avatar
 
အသင္း၀င္ေန႔စြဲ: Apr 2009
ေရးသားခ်က္မ်ား: 15
ႏိုင္ငံအလံ: Users Flag!
ေက်းဇူးတင္စကား: 6
ပို႔စ္ 12 ခုအတြက္ 17 ဦးမွ ေက်းဇူးတင္ေၾကာင္းေျပာပါသည္။
ပံုမ်ား: 2
kေဇာ္ေအာင္ is on a distinguished road
ျပန္စာ - Wireless Router Configuration

ကန့္သတ္ခ်က္ permission ေတြနဲ့ limit လုပ္ျခင္တယ္ဆိုရင္ေတာ့ မိမိစက္ကို ISA Server တင္ျပီးေတာ့ လုပ္သင့္ပါတယ္။

( ျဖစ္ႏိုင္ရင္ အဲဒါေလးကို တစ္ခ်က္ေလာက္ရွင္းျပေပးလို့ရမလား ခင္ဗ်ာ..က်ြန္ေတာ္လည္း လိုအပ္ေနလို့ပါ...က်ြန္ေတာ့ ဆိုင္မွာအဲလိုေလးထားခ်င္လို့ပါ....ေက်းဇူးတင္ပါတယ္ )
kေဇာ္ေအာင္ is offline   Reply With Quote
ေအာက္ပါအသင္း၀င္မွ kေဇာ္ေအာင္ အား ေက်းဇူးတင္စကား ေျပာၾကားသြားပါသည္။
Old 08-07-2016, 11:35 AM
kေဇာ္ေအာင္
လမ္းေလွ်ာက္တတ္စ
 
kေဇာ္ေအာင္'s Avatar
 
အသင္း၀င္ေန႔စြဲ: Apr 2009
ေရးသားခ်က္မ်ား: 15
ႏိုင္ငံအလံ: Users Flag!
ေက်းဇူးတင္စကား: 6
ပို႔စ္ 12 ခုအတြက္ 17 ဦးမွ ေက်းဇူးတင္ေၾကာင္းေျပာပါသည္။
ပံုမ်ား: 2
kေဇာ္ေအာင္ is on a distinguished road
ျပန္စာ - Wireless Router Configuration

အမွန္ျခစ္ ရွိထားၿပီးၿပီဗ် ....ဘာမွားေနလဲမသိဘူး က်န္တာအားလံုးသံုးလို႔ရၿပီး အင္တာနက္လည္းရွိၿပီး ဘေရာက္စင္း ပဲမရတာ
kေဇာ္ေအာင္ is offline   Reply With Quote
ေအာက္ပါအသင္း၀င္မွ kေဇာ္ေအာင္ အား ေက်းဇူးတင္စကား ေျပာၾကားသြားပါသည္။
Old 09-07-2016, 08:06 AM
zo
အထူးအသင္း၀င္
 
zo's Avatar
 
အသင္း၀င္ေန႔စြဲ: Jul 2008
တည္ေနရာ: the earth that GOD created.
ေရးသားခ်က္မ်ား: 1,196
ႏိုင္ငံအလံ: Users Flag!
ေက်းဇူးတင္စကား: 18,656
ပို႔စ္ 1,037 ခုအတြက္ 5,994 ဦးမွ ေက်းဇူးတင္ေၾကာင္းေျပာပါသည္။
zo will become famous soon enough
ျပန္စာ - Wireless Router Configuration

အကိုေရ ..
1.Click Start ကေန cmd လို႐ုိက္ေပးရင္ Command Prompt ေတြရပါမယ္။
2. Command Prompt ကို Right-click ျပီး select Run as Administrator.
3. ျပီးရင္ ping 127.0.0.1 ကို ႐ုိက္ေပးရင္ ေအာက္ကပံုလုိမ်ိဳး reply from ဆိုတာ ရပါလိမ့္မယ္။


၄. ping 8.8.8.8 ကို ႐ုိက္ေပးပါ။ျပီးရင္ အေပၚကလို reply from ဆိုတာရရင္ အင္တာနက္ရွိတယ္လုိ႕ ေျပာႏုိင္ပါတယ္။တကယ္လုိ႕ reply from မရပဲ ေအာက္ကလို timed-out. ဆိုတာျပရင္ေတာ့ အင္တာနက္လိပ္စာမွားေနတယ္လုိ႕ ေျပာလို႕၇ပါတယ္။


၅့ အေပၚကလို timed-out. ျဖစ္ခဲ့၇င္ ေအာက္က ပံုမွာ ျမားတားထားတဲ့ စာေတြကို တခုခ်င္းစီ အစဥ္လိုက္သာ ႐ုိက္ေပးပါ့။ အဆင္ေျပပါေစ


See You When I See You

Last edited by zo; 09-07-2016 at 08:07 AM..
zo is offline   Reply With Quote
Old 09-07-2016, 04:56 PM
kေဇာ္ေအာင္
လမ္းေလွ်ာက္တတ္စ
 
kေဇာ္ေအာင္'s Avatar
 
အသင္း၀င္ေန႔စြဲ: Apr 2009
ေရးသားခ်က္မ်ား: 15
ႏိုင္ငံအလံ: Users Flag!
ေက်းဇူးတင္စကား: 6
ပို႔စ္ 12 ခုအတြက္ 17 ဦးမွ ေက်းဇူးတင္ေၾကာင္းေျပာပါသည္။
ပံုမ်ား: 2
kေဇာ္ေအာင္ is on a distinguished road
ျပန္စာ - Wireless Router Configuration

အကိုေျပာတဲ့ အတိုင္းလုပ္ျကည့္ေတာ့လည္းအဆင္ေျပေနတယ္ဗ်
packets sent = 4, Received =4 , Lost = 0 <0% loss >
ဆိုျပီးျပေနတယ္ အင္တာနက္ရွိတယ္ဗ် Browsing ပဲလုပ္မရတာ လုပ္လိုက္တိုင္း take so long time ဆိုျပီးရပ္ရပ္သြားတာ အခ်ိန္ေပးျပီး ရွင္းျပေပးေနတာ တကယ္ေက်းဇူးတင္ပါတယ္ဗ်ာ အားလည္းနာလွပါျပီ
kေဇာ္ေအာင္ is offline   Reply With Quote
ေအာက္ပါအသင္း၀င္ 2 ဦးတို႔မွ kေဇာ္ေအာင္ အား ေက်းဇူးတင္စကား ေျပာၾကားသြားပါသည္။
Old 09-07-2016, 09:36 PM
zo
အထူးအသင္း၀င္
 
zo's Avatar
 
အသင္း၀င္ေန႔စြဲ: Jul 2008
တည္ေနရာ: the earth that GOD created.
ေရးသားခ်က္မ်ား: 1,196
ႏိုင္ငံအလံ: Users Flag!
ေက်းဇူးတင္စကား: 18,656
ပို႔စ္ 1,037 ခုအတြက္ 5,994 ဦးမွ ေက်းဇူးတင္ေၾကာင္းေျပာပါသည္။
zo will become famous soon enough
ျပန္စာ - Wireless Router Configuration

အကိုေရ ping www.google.com ျဖစ္ျဖစ္၊အျခား ၀က္ဆိုဒ္တခုခုကို cmd ကေန ping www.google.com လို ေရးၾကည့္တာ ေအာက္မွာ ---
၁.pinging www.google.com [xxx.xxx.xxx.xxx]
၂. reply from [xxx.xxx.xxx.xxx] ဆိုျပီး reply from ရတယ္ဆိုခဲ့၇င္ ...
Browser (firefox, chrome) တခုခုရဲ့ အေပါက လိပ္စာေရးတဲ့ေနရာ www.google.com မွာ -
[xxx.xxx.xxx.xxx] နံပါတ္ေတြခ်ည္းပဲ ေရးၾကည့္ေပးပါလား။ တကယ္လို႔ အဲ့လိုေရးလို႔ google ဆီကို ေရာက္တယ္ဆိုရင္ေတာ့ ျပသနာက xxx.xxx.xxx.xxx ကေန www.google.com ေျပာင္းတဲ့ေနရာမွာ အခ်ိတ္အဆက္မမိတာ ျဖစ္နုိင္ပါတယ္။

အရင္စမ္းၾကည့္ေပးပါလားအကို

See You When I See You
zo is offline   Reply With Quote
ေအာက္ပါအသင္း၀င္မွ zo အား ေက်းဇူးတင္စကား ေျပာၾကားသြားပါသည္။
Old 05-08-2016, 10:14 AM
itmyanmar
လမ္းေလွ်ာက္တတ္စ
 
အသင္း၀င္ေန႔စြဲ: Feb 2012
ေရးသားခ်က္မ်ား: 18
ႏိုင္ငံအလံ: Users Flag!
ေက်းဇူးတင္စကား: 0
ပို႔စ္ 17 ခုအတြက္ 29 ဦးမွ ေက်းဇူးတင္ေၾကာင္းေျပာပါသည္။
itmyanmar is on a distinguished road
ျပန္စာ - Wireless Router Configuration

How to Set Up a Wireless Router
Four Parts:Connecting the HardwareConnecting Your Router To Broadband ProvidersConfiguring the RouterConnecting Your DevicesCommunity Q&A
As more and more devices are able to connect to wireless networks, setting up a wireless router has become a crucial step for virtually any home network. Setting up a wireless network will allow your devices to connect to the internet from practically anywhere in the house, without the need for messy wires. To get started setting your network up, see Step 1 below.


Part
1
Connecting the Hardware
Image titled Set Up a Wireless Router Step 11
Purchase a wireless router. Routers come in all shapes and sizes. Compare features to find the router that is right for you. If you have more area that you need to cover, or have lots of walls in your home, you’ll need a router that offers the option of upgrading antenna(s) with high gain types - if not supplied in the box. If more than one wireless device will be connecting at the same time at different speeds, a MiMo type router is recommended, otherwise the speed for all devices will drop the highest supported by all at that time.
All modern routers should support 802.11n, or Wireless-N). This is the most stable, offers the fastest speeds and is backwards compatible with older standards such as 802.11g.

2
Connect your router to your modem. Routers and wireless routers enable you to share your broadband internet connection with multiple devices. To do so, you will need to connect your broadband modem to the router. For best results, place your router near your modem.
Connect the router and the modem with an Ethernet cable. Most routers come packaged with a short Ethernet cable that you can use for this.
Connect the modem to the WAN/Internet port on your router. It is usually offset, and may be a different color from the LAN ports.
3
Connect any devices you want to hard wire with CAT 5 (or better) Ethernet cables. If you have computers that are close, or a video game console or TV, you can connect them to the router via Ethernet. This will result in a more stable and faster connection, and doesn’t require any extra configuration.
4
Connect at least one computer via Ethernet. You will need at least one computer connecting via Ethernet cable in order to adjust your router settings. You can disconnect this computer afterwards if you want to connect wirelessly.

Part
2
Connecting Your Router To Broadband Providers
1
When you power on the router, it will only create its wi-fi network, and the device will be connected to the router's wi-fi connection, not the internet. To connect the router to the internet, with some internet providers (i.e. GTPL in India), it is required to register router's MAC address to the internet service provider's website.


2
MAC of the router can be found printed on router or in the documents etc.
3
Go to the internet service provider's website. Log in with the username and password provided by the internet service provider and go to MAC address update option. one can see their existing laptop/pc's MAC address there. Add the router's MAC address there and save it. This process means that the router is authorized to use the internet provide by the broadband company.

Part
3
Configuring the Router
Image titled Set Up a Wireless Router Step 51
Find the IP address of the router. If this is a new installation or new router, determine the default IP address that may be printed on a label affixed to the router or in the documentation. If you can’t find the router’s IP address anywhere, you can do a web search for the router model to see what the default address is. [1]
IP addresses are formatted as four groups of up to three digits, separated by periods.
Most default IP addresses are 192.168.1.1, 192.168.0.1, or 192.168.2.1.
Image titled Set Up a Wireless Router Step 62
Open a web browser on the computer that is connected to the router. Enter in the IP address of the router into the address bar and press Enter. Your browser will attempt to connect to the router’s configuration menu.
If your router came with an installation disc, you can run the configuration program from that instead. It will accomplish many of the same functions.
Image titled Set Up a Wireless Router Step 73
Enter your username and password. In order to access the configuration page, you will need to be on the router's IP address and enter a valid username and password at the prompt. Most routers have a basic account set up that you will need to use to log on. This varies from model to model, but should be printed on the router or in the documentation.
The most typical username is “admin”.
The most typical passwords are “admin” and “password”.
Many routers will only require a username and a blank password, and some allow you to leave all fields blank.
If you can’t figure out the correct IP address, your username or password, search for your router model online to see what the default login is. If it has been changed, press the Reset button on the back of the router for 10 (to 30+ seconds as dictated in the instructions for the router model) to restore factory defaults and try again.
Image titled Set Up a Wireless Router Step 84
Open the Wireless Settings. When you log in to your router, you will be taken to the router’s main menu or status screen. There will be several options to choose from. The Internet section can usually be left at default settings, unless you received specific instructions from your internet service provider. The Wireless section will allow you to set up your wireless network.
Image titled Set Up a Wireless Router Step 95
Enter a name for your wireless network. In the Wireless section, you should see a field labeled SSID or Name. Enter a unique name for your wireless network. This is what other devices will see when scanning for networks.
Check the box to enable SSID broadcast. This will essentially “turn on” the wireless network so that it may be readily seen by anyone in range of the signal. *See the Tips section below for additional information on the SSID setting.
Image titled Set Up a Wireless Router Step 106
Choose a security method. Choose from the list of available security options. For the best security, choose WPA2-PSK as the encryption method. This is the most difficult security to crack, and will give you the most protection from hackers and intruders.
Image titled Set Up a Wireless Router Step 117
Create a passphrase. Once you’ve chosen your security method, enter in a passphrase for the network. This should be a difficult password, with a combination of letters, numbers, and symbols. Don’t use any passwords that could be easily deduced from your network name or from knowing you.
Image titled Set Up a Wireless Router Step 128
Save your settings. Once you are finished naming and securing your wireless network, click the Apply or Save button. The changes will be applied to your router, which may take a few moments. Once the router has finished resetting, your wireless network will be enabled.
Image titled Set Up a Wireless Router Step 139
Change your router’s username and password from the default. Once you have your network configured, you should change the username and password that you use to access your router. This will help protect your router from unauthorized changes. You can change these from the Administration section of the router configuration menu.[2]
Image titled Set Up a Wireless Router Step 1410
Block sites. If you want to prevent devices that are connected to your network from accessing certain websites, you can use built-in blocking tools to restrict access. These can be found in the Security/Block section of the router.
You can usually block by specific domain names, or by keywords.

Part
4
Connecting Your Devices
Image titled Set Up a Wireless Router Step 151
Connect a computer, tablet, or smartphone to the wireless network. Scan for the wireless network with the SSID you provided above. On any device that supports wireless networks, you should see your new network as long as you are within range of the router. Select it and you will be prompted for the passphrase.
Image titled Set Up a Wireless Router Step 162
Enter your wireless passphrase. Once you enter the passphrase, your device will be automatically connected to the wireless network. The network will be stored in your devices memory and will automatically connect whenever you are within range.
For detailed instructions on selecting and joining a wireless network for your specific computer, tablet, or smartphone, follow this guide.
Image titled Connect a Printer to Your Computer Step 133
Connect your other devices. Besides other computers and tablets, you can connect other devices as well, such as printers, game consoles, TVs and more. See the following guides for instructions for your specific device.
Install a wireless printer.
Connect a PlayStation 3 to a wireless network.
Connect an Xbox 360 to a wireless network.
Connect a Nintendo Wii to a wireless network.
Connect Apple TV to the wireless network.
အလြန္ေကာင္းမြန္တဲ့စနစ္ျဖစ္ျပီး ရွင္းလင္းမႈဟာလည္း ေကာင္းမြန္ပါတယ္
ကၽြန္ေတာ္ http://www.wikihow.com/Set-Up-a-Wireless-Router မွ ကူးယူ ေဖာ္ျပျခင္းျဖစ္ပါတယ္။
itmyanmar is offline   Reply With Quote
ေအာက္ပါအသင္း၀င္ 2 ဦးတို႔မွ itmyanmar အား ေက်းဇူးတင္စကား ေျပာၾကားသြားပါသည္။
Old 05-08-2016, 10:23 AM
itmyanmar
လမ္းေလွ်ာက္တတ္စ
 
အသင္း၀င္ေန႔စြဲ: Feb 2012
ေရးသားခ်က္မ်ား: 18
ႏိုင္ငံအလံ: Users Flag!
ေက်းဇူးတင္စကား: 0
ပို႔စ္ 17 ခုအတြက္ 29 ဦးမွ ေက်းဇူးတင္ေၾကာင္းေျပာပါသည္။
itmyanmar is on a distinguished road
ျပန္စာ - Wireless Router Configuration

http://www.tp-link.com/en/faq-618.html
မွလည္း သြားေရာက္ ၾကည့္ရႈ့ႏိုင္ပါတယ္
itmyanmar is offline   Reply With Quote
ေအာက္ပါအသင္း၀င္ 2 ဦးတို႔မွ itmyanmar အား ေက်းဇူးတင္စကား ေျပာၾကားသြားပါသည္။
Old 25-12-2016, 02:18 PM
က်န္းသုျငိမ္း
ေမြးကင္းစကေလး
 
က်န္းသုျငိမ္း's Avatar
 
အသင္း၀င္ေန႔စြဲ: Aug 2014
ေရးသားခ်က္မ်ား: 4
ႏိုင္ငံအလံ: Users Flag!
ေက်းဇူးတင္စကား: 18
ပို႔စ္ 4 ခုအတြက္ 5 ဦးမွ ေက်းဇူးတင္ေၾကာင္းေျပာပါသည္။
က်န္းသုျငိမ္း is on a distinguished road
ျပန္စာ - Wireless Router Configuration

wifi ကို သူမ်ား ကို တလ ဘယ္ေလာက္ တစ္ဂစ္ ဘယ္ေလာက္နဲ ့ ေပး ခ်င္ပါ တယ္ ဘယ္ လို လုပ္ေဆာင္ရမလဲ နည္းဘယ္နမ်ိဳ း ရွိလဲ
ဘယ္ေလာက္ အတိုင္းအတာ က်လဲသိခ်င္ပါတယ္
ႀကိဳ းနဲ ့ စက္က ေတာ့ အခန္းကို ေရာက္ပါျပီ
သူမ်ား ကို ပက္စဝပ္ေပးျပီး ျပန္လုပ္ခ်င္ပါတယ္
သိတဲ ့ ဆရာ မ်ား ညႊန္ျပေပးပါဦး
က်န္းသုျငိမ္း is offline   Reply With Quote
ေအာက္ပါအသင္း၀င္မွ က်န္းသုျငိမ္း အား ေက်းဇူးတင္စကား ေျပာၾကားသြားပါသည္။
Reply

Tags
networking faqs, networking guide, networking howto, networking knowledge

တန္ဆာပလာမ်ား
ေဖာ္ျပမႈပံုစံ

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

ဖိုရမ္ေတြ ေက်ာ္ေရာက္ခ်င္ရင္ !

အျခားဆင္တူေဆြးေႏြးခ်က္မ်ား
ေဆြးေႏြးခ်က္ စတင္ေရးသားသူ ကြပ္ပ်စ္၀ိုင္း ျပန္စာမ်ား ေနာက္ဆံုးပို႔စ္
Wireless ကေန LAN ကို ခ်ိတ္မယ္ ( Window XP) komyo2010 Network ပိုင္းဆိုင္ရာ 17 30-06-2016 03:59 AM
Network နင့္ပတ္သက္ေသာ ebookမ်ား zthet E-Books & Tutorials 94 10-10-2013 03:04 PM
Window XP setup a wireless network komyo2010 Network ပိုင္းဆိုင္ရာ 2 09-01-2009 07:52 PM


ဖိုရမ္၏ ပင္မအခ်ိန္သည္ ဂရင္းနစ္စံေတာ္ခ်ိန္ +6.5 ျဖစ္သည္။ေဒသစံေတာ္ခ်ိန္ 08:12 PM
Inactive Reminders By Icora Web Design